A Little Separation
Has Never Looked This Good
Has Never Looked This Good
We've spent two years crafting the most durable, intuitive and easy-to-use hardware kit.
What used to require several tools and an expert for installation, is now a stress-free DIY project.
Our solid wood slats come with machine precision-drilled holes, so the hardware simply needs to be inserted and tightened with a screwdriver.
Move it, reconfigure it, add to it, bring it with you.
While it looks like it was custom built, the room divider can be removed and endlessly reconfigured without damaging the slats.
Each slat is fastened to the floor and ceiling independently. This makes for the most straightforward installation and allows you to rotate each slat individually from the others.
Our slats are crafted from two materials:
1. The core of each slat is made from solid carbonized pine, which has been heat-treated to prevent warping and twisting over time.
2. The surface of each slat is a 1mm thick natural wood veneer, from either American Black Walnut or European White Oak. All four sides of each slat are veneered.
Please note, it's a common misconception that "veneer" means "artificial" or "fake". Wood veneer is simply a slice of real wood (not melamine or laminate) that is securely adhered to a solid core. It has been used by furniture makers for hundreds of years as it has all the benefits of solid wood (same look and feel) without the twisting and warping of solid wood.
Yes, the slats are easy to cut with a circular or mitre saw and a standard wood blade. The edges can even be sanded if desired.
The pre-drilled holes in each end (for the hardware) are 4cm deep. The hardware requires 2.6cm of depth to fit properly in each end, so if you cut more than 1.4cm from either end of the wood slats, you'll need to re-drill the holes for the hardware. This will require a 7/16" drill bit.
We don't offer cutting services or custom sizes at this time.
The hardware kit includes four spring-loaded pins and four threaded bolts, as well as eight floor/ceiling plates. 20 black Phillips screws are also included.
The spring-loaded pins can be easily compressed, allowing them to fit inside the ceiling plates. Once they're released, the spring expands the pin and holds the slat in place from the ceiling.
The threaded bolt works similarly, but on the floor. The bolt is fitted into the floor plates, and then twisted to expand outwards. The combination of the floor and ceiling hardware holds each slat in place, and allows each slat to rotate 360º.
Due to limited availability, we do not sell the hardware kit without the slats.
Yes! The wood is sanded to 320 grit and left unfinished. It can be installed like this, or stained on-site with the finish of your choosing. The wood can also be painted on-site if desired.