Filter

    Rotating Wood Slat Room Divider

    Our rotating wood slat room divider separates a space without closing it off. Every slat turns 360° on patented hardware, so you decide how much light and privacy passes through. Each rotating slat room divider arrives pre-finished, with pre-drilled slats in real walnut or oak veneer.

    A Rotating Slat Room Divider on Patented 360° Hardware

    How a Rotating Room Divider Controls Light and Privacy

    Turn the slats flat to the room and the space stays open and bright. Angle them and the view closes while light still filters through. Each slat sits on spring-loaded hardware fixed to the floor and ceiling, holds its position, and can be lifted out when you want to rearrange the divider. The slats use a high-density MDF core finished in real hardwood veneer.

    Between the front door and the living room, the divider can create an entry zone without building a wall. In an open-plan home, it marks where the kitchen ends and the lounge begins. In a studio or shared bedroom, it can screen a bed or desk corner, then open back up when you want the space to feel connected again.

    Standard or Wide Slats for Your Rotating Divider

    • Standard 4.7" slats: four slats per box, in 6', 8', 9' and 10' lengths, finished in American Walnut, European Oak, Black Oak or Golden Oak. A finer rhythm that lets more light through.
    • Wide 9.5" slats: two slats per box, in 8' and 9' lengths, finished in American Walnut, European Oak or Black Oak. More coverage per slat for a stronger sense of privacy.

    Each slat length fits a set ceiling range without cutting. For taller ceilings, cut the slats on site or frame them with a header or footer. The optional Floor/Ceiling Base mounts the hardware with fewer holes in your floor and ceiling.

    Shop similar collections: Wood Slat Room Dividers | Wood Paneling | 9' Wood Slat Panels | Living Room Wall Panels | Office Wall Panels

    Compare Rotating Room Divider Finishes Before You Build

    Wood tone matters more on a divider than on a wall because you see both sides. Order fully refundable divider samples to check the finish in your own light; buy three and the fourth is free. Andor Willow ships to the US and Canada, and 99% of orders ship in 2 days or less.

    FAQs About Rotating Wood Slat Room Dividers

    How do the slats rotate?

    Each slat mounts on patented, spring-loaded hardware at the floor and ceiling. It turns a full 360° and holds wherever you leave it.

    Can I remove or move the slats later?

    Yes. The hardware lets you lift a slat out in seconds without damaging it, so you can respace the divider or take it down.

    What ceiling heights do the slats fit?

    Slats come in 71.25", 94.5", 106.3" and 118.9" lengths, and each fits a narrow ceiling range without cutting. Wide 9' slats, for example, fit ceilings from 107.3" to 108.3". For other heights, cut the slats down or add a header or footer.

    What tools do I need to install it?

    A drill, a level, a laser level, a tape measure and a pencil. The slats come with pre-drilled holes, and the optional Floor/Ceiling Base cuts down on drilling.

    Trusted by Businesses, Big and Small

    Decorative Wood Panels for Walls
    Wall Panel Design
    Fluted Wood Panel Samples Willow Panel Samples Wood Slat Room Divider Samples Paintable MDF Fluted Wall Panel Samples Paintable MDF V-Groove Wall Panel Samples

    Planning made easy

    Refundable Samples

    Whether you're a designer, a DIYer, or anywhere in between - samples are always the best way to start your project.

    Shop All Samples